Whatsapp : +918077584018
Email : enquiry@quaintrefining.com

Crestron MC2E Compact Control System with Ethernet

Condition: Used

Description: Crestron MC2E Professional Media Controller (Compact Control System with Ethernet)

Model No:  MC2E

To ask the quote for following product, please complete the below request form and one of Quaint Refining representative will be in contact with you to respond on your query shortly.


Category:

Description

Crestron MC2E Compact Control System with Ethernet -Professional Media Controller
Key Features
  • 2-Series engine | Dual-bus architecture
  • Cresnet port – master/slave selectable
  • 10/100 Ethernet | SSL encryption
  • e-Control 2 and RoomView enabled | SNMP support
  • 2 Com ports (RS-232/422/485)
  • 4 IR/serial ports
  • 4 Versiport I/O ports
  • 4 Low-voltage relay ports
  • IR wireless compatible using CNXRMIRD
  • External power pack included
  • Single-space EIA rack-mountable
Memory
SDRAM 32 MB
NVRAM 256 KB
Flash 4 MB
Operating System
Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL Windows™ and SIMPL+®
Ethernet
10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView™ applications
Connectors
COM A – B (2) DB9 male, bidirectional RS-232/422/485 ports;
Up to 115.2k baud;
Hardware and software handshaking support;
All ports support C2N-NPA8 Network Poll Accelerator
INFRARED-SERIAL OUTPUT A – D (4) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud;
Individual signal generator per port, allowing simultaneous firing of all ports
I/O Versiports 1 – 4 (1) 5-pin 3.5mm detachable terminal block comprising (4) digital input/output or analog input ports (referenced to GND);
Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.24 Volts DC;
Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads;
Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms;
Programmable 5 Volts, 2k ohms pull-up resistor per pin
RELAY OUTPUT 1 – 4 (1) 8-pin 3.5mm detachable terminal block comprising (4) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
IR IN (1) 3-pin 3.5mm detachable terminal block;
For connection of the CNXRMIRD IR Receiver (sold separately);
Allows IR wireless control from Crestron or third-party remotes using RC-5 IR commands
LAN (1) 8-wire RJ45 with 2 LED indicators;
10/100BaseT Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity
COMPUTER (1) DB9 female, RS-232 computer console port
NET (1) 4-pin 3.5mm detachable terminal block;
Cresnet port, Master/Slave selectable;
Expandable via C2N-NPA8 Network Poll Accelerator
24VDC (1) 2.1mm barrel DC power jack, 24 Volt DC power input;
(PW-2420RU power pack included);
Passes through to NET port to power Cresnet devices
Reset Buttons
HW-R Hardware reset (reboots the control system)
SW-R Software reset (restarts the SIMPL program)
LED Indicators
PWR (1 green) Indicates DC power supplied to unit
NET (1 yellow) Indicates Cresnet bus activity
MSG (1 red) Indicates control system has generated an error message
LNK (1 red) Indicates a valid connection on LAN port
ACT (1 red) Indicates activity on LAN port
Power Requirements
Power Pack 2.0 Amps @ 24 Volts DC;
100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included
Available Cresnet Power 38 Watts using PW-2420RU power pack (included)
Cresnet Power Usage 12 Watts (0.5 Amp @ 24 Volts DC) using Cresnet network power (no power pack connected to the 24VDC connector)
Environmental
Temperature 41° to 113°F (5° to 45°C)
Humidity 10% to 90% RH (non-condensing)
Enclosure
Chassis Metal, black matte finish
Faceplate Extruded aluminum, black matte finish with polycarbonate label overlay
Mounting Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included)
Dimensions
Height 1.80 in (46 mm);
1.70 in (44 mm) without feet
Width 17.03 in (433 mm);
19.0 in (483 mm) with ears
Depth 8.65 in (220 mm)
Weight
4.3 lbs (2.0 kg)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.